Huawei launches Connected City Lighting solution to save 80% of energy use

Welcome speech by Swift Liu, president of Huawei Switch
and Enterprise Communications Product Line

At CeBIT 2016, Huawei has debuted its Connected City Lighting solution, claimed to be the industry’s first Internet of Things (IoT) lighting solution with multi-level intelligent control.

Huawei Connected City Lighting Solution connects street lamps to the IoT and adopts a GIS-based management system, enabling cities to enhance the control and performance of every street lamp. The solution provides municipal managers with status information on each lamp, in every street and enables precise control of on-off switches and brightness of individual street lamps, allowing on-demand lighting and a reduction in energy consumption by up to 80%

According to The Climate Group, there are approximately 304 million street lamps around the world, and the number is expected to reach 352 million by 2025. Street lamps are almost ubiquitous in cities. While these lamps bring convenience to people’s lives, they also consume a vast amount of energy and increase management costs for municipalities. For example, London has approximately 35,000 street lamps, resulting in an estimated total power consumption of 56,000,000kWh per annual, together with inspection costs and maintenance fees, the street lamps significantly impact municipal expenses. Huawei Connected City Lighting Solution is designed to address these issues.

Integrated smart lighting policies to ensure high energy efficiency

With Huawei’s Connected City Lighting Solution, each street lamp is equipped with a power and brightness controller. Unlike industry-standard access methods such as through Wi-Fi, Huawei adopts 6LoWPAN technology, which has lower power consumption, and can automatically diagnose, network, and trouble-shoot problems, as well as enable better interaction between street lamps and other smart devices such as sensors. To enhance the control and performance of street lamps, the solution integrates a series of preset smart lighting policies to:

  •  Automatically calculate lighting duration based on local longitude and latitude, and dynamically adjust lighting duration according to the specific season, month, and day.
  • Smartly adjust brightness by connecting built-in brightness sensors with third-party traffic and people flow sensors, or based on weather and other environment conditions. For instance, automatically reduce street lamp brightness or only switch on every other lamp at midnight when traffic volume is low; or turn lamps on when there is poor visibility such as on rainy days.

Huawei Connected City Lighting Solution pares LED lamps with smart lighting polices. When compared with conventional street lamps, such as high pressure sodium lamps, they help reduce energy consumption by up to 80%.

Visible management and online inspection to prevent failures

Wu Chou, CTO of Huawei Switch and Enterprise Communications Product Line, debuted the solution.
Wu Chou, CTO of Huawei Switch and Enterprise Communications Product Line, debuted the solution.

Huawei’s solution adopts a GIS-based management system, which displays comprehensive information about the street lamps, including the number of lamps in each street, their current status, as well as their installation position and time. Using this solution, one person can manage thousands of lamps in different streets. When a street lamp malfunctions, the system is automatically alerted and sends a message to notify maintenance personnel. Additionally, the solution provides full lifecycle management to prevent potential malfunctions. This reduces the need for on-site inspection, cutting manpower costs while improving management efficiency.

Multi-level smart control for enhanced protection and reliability

Traditional street lamps are controlled collectively at a central point, and cannot be controlled individually. A system failure in this scenario could result in massive energy wastage, such as street lamps being turned on during bright sunlight. Huawei Connected City Lighting Solution addresses this challenge by providing multi-level smart controls, which comprise network smart controls on the first level and local smart controls on a secondary level.

The agile IoT gateways and street lamp controllers are equipped with lightweight components to execute lighting policies and deliver a two-level localised decision-making mechanism. When the uplink network of agile gateways fails, local control protocols are enforced. Therefore, if the 6LoWPAN sensor network fails, street lamp controllers can work offline and function independently. Multi-level smart control minimises the lamps’ dependency of centralised controls, thereby increasing flexibility and reliability.

All-layer openness to build a Smart City

Huawei Connected City Lighting Solution adopts an all-layer open architecture:

  • Its base-layer processor development can be based on lightweight open-source LiteOS, facilitating standardisation and efficient connections among third-party devices.
  • The agile gateways support a virtualised architecture, enabling the development and installation of customised applications by partner companies.
  • The agile controllers also provide third-party application systems with a standard northbound interface, helping to better integrate various service components, allowing comprehensive interaction with the smart transportation, environment monitoring, and municipal management systems.
Huawei and Enika Smart Light a.s.(ESL) launched the Connected City Lighting Solution
Huawei and Enika Smart Light a.s.(ESL) launched the Connected City Lighting Solution

Commenting on the role of Huawei Connected City Lighting Solution to drive Smart City development, Wu Chou, CTO of Huawei Switch and Enterprise Communications Product Line, said, “Since the launch of Huawei Agile IoT Solution in May 2015, we have delivered several successful applications, including the power IoT solution, smart building solution, and smart stock breeding solution.

Huawei Connected City Lighting Solution is another powerful application of Huawei Agile IoT Solution, and an important advancement towards a truly Smart City. Lighting IoT lays a solid foundation for the integration of a variety of sensors, to facilitate functions such as environmental and transportation monitoring, and installation of smart charging facilities and intelligent rubbish bins, providing Smart City development with valuable big data and integrated interaction to improve citizens’ lives.”

Experience products and services live at CeBIT from March 14-18 at the Deutsche Telekom stand C38 in hall 4; and at the Huawei booth B54 in hall 2.

Comment on this article below or via Twitter: @IoTNow_ OR @jcIoTnow

Recent Articles

Spike in use of cloud-based security to protect corporate data

Posted on: July 1, 2020

A new survey of UK security practitioners by Exabeam shows a marked increase in the adoption of cloud-based security tools compared to an earlier study carried out in March prior to the COVID-19 lockdown. The latest data shows 88% of recent respondents said the accelerated move to the cloud was driven by the need to

Read more

Telcos must be cautiously aggressive to ‘Roar out of Recession’

Posted on: June 30, 2020

As we approach four months since essentially the entire world went on lockdown, telcos have gone through a very mixed experience.

Read more