Measuring surface roughness in turned parts

Traditionally, cylinder bores surfaces in cars were like the Himalayas lots of peaks and troughs. When piston rings went up and down, this would slice the tops of these off, so manufacturers made the bores tight to pre-empt this. Consequently, in the past motorists need to “run-in” their engine, limiting its speed for the first thousand miles or so. While the automotive world has moved on, this is an early example of how manufacturers recognised the value of surface characteristics. Here Mike John, technical director at The Sempre Group explains the importance of surface roughness and how to get the most out of this data.

Surface roughness often dictates how one part interacts with another. For example, if a shaft is rotating inside a bearing, a rough surface is undesirable because it causes excess friction. Meanwhile, a smooth and round surface ensures optimal performance by minimising resistance. If turned parts have the wrong surface characterisations, they could wear out, get bigger, smaller or rattle around.

In the automotive sector, surface texture is vital for anything that rotates in an engine. For example, camshafts will sit on a white metal bearing, a smooth object with a coating, and oil will produce a frictionless surface. However, if the surface roughness is poor, this will cause metal-to-metal contact. Consequently, the part will wear quicker, and irregularities in smoothness can produce nucleation sites where breaks and corrosion occur.

Measurement in action

On the shop floor, most engineers and manufacturers use roughness average (Ra) to measure change in process and understand micro- and macro-level geometric irregularities. The Ra will tell them if their tools are wearing out and producing different surface characteristics over time. Armed with this information, they can decide whether to make a tool change to remain within spec.

Ra won’t give the full picture, just an average. It assigns a value to the deviation away from a median height say, on an engine’s crankshaft but says nothing about the direction of surface performance. Knowing what parameters will provide the required functionality of the surface is the first step. For instance, manufacturers can use plateau honing to create a metallurgically stable microstructure on the wall of a cylinder bore. Then, they can characterise the peaks and troughs as a number using skewness (RSK) and determine whether this is positive or negative. Automotive manufacturers will often use three or four characteristics, including Rz and response surface methodology (RSM).

There are two methods of finish measurement skidded and skidless. Skidded stylus systems are ideal for simple measurement of high-frequency surface roughness, while skidless technologies are better for low-frequencies ripples, waviness and surface profiles. For example, the Jenoptik Waveline W5 features a skid situated by a stylus. The skid drags along the surface to remove the need for a straightness reference, removing added costs. The system can measure up to 28 parameters and includes a changeable probe and guide system for adaptability.

Data collection

Most engineering drawings specify the required dimensions and surface texture of turned parts. Following measurement, manufacturers can compare their system’s output against the initial spec to determine compliance. Despite its importance, most manufacturers don’t tend to gather their surface roughness data or store it effectively. It’s often treated as a tick-box exercise and, providing it’s within spec, many don’t give it a second look.

However, automated solutions can help manufacturers gather surface roughness data and export it easily. For example, using High QA Inspection Manager, they can scan entire drawings, or multiple pages, in one click and automatically extract surface roughness data. The process is fully automated, enabling total traceability.

The automotive industry has come a long way from tight cylinder bores, but surface roughness is still as important as it ever was. Knowing how to measure surface characteristics accurately and then capture this data is vital for ensuring part efficiency and functionality.

To find out more about Jenoptik optical shaft measurement systems, visit the Sempre website.

Comment on this article below or via Twitter: @IoTNow_OR @jcIoTnow

RECENT ARTICLES

SICK and Aeva partner to bring 4D LiDAR to industrial sensing applications

Posted on: August 3, 2022

Waldkirch, Germany & Mountain View, United States – Aeva, a provider in next-generation sensing and perception systems, and SICK AG announced a strategic multi-year collaboration to bring Aeva’s FMCW (frequency modulated continuous wave) 4D LiDAR to a variety of industrial sensing applications including long range sensing, starting with Aeries II.

Read more

IoT devices have outstripped non-IoT connections – what’s next for IoT connectivity?

Posted on: August 3, 2022

Global IoT connectivity is forever changed. In 2020, in spite of the pandemic, IoT connections in the form of connected cars, smart homes and connected industrial equipment to name a few, outstripped non-IoT connections, such as smartphones and laptops, for the first time.

Read more
FEATURED IoT STORIES

9 IoT applications that will change everything

Posted on: September 1, 2021

Whether you are a future-minded CEO, tech-driven CEO or IT leader, you’ve come across the term IoT before. It’s often used alongside superlatives regarding how it will revolutionize the way you work, play, and live. But is it just another buzzword, or is it the as-promised technological holy grail? The truth is that Internet of

Read more

Which IoT Platform 2021? IoT Now Enterprise Buyers’ Guide

Posted on: August 30, 2021

There are several different parts in a complete IoT solution, all of which must work together to get the result needed, write IoT Now Enterprise Buyers’ Guide – Which IoT Platform 2021? authors Robin Duke-Woolley, the CEO and Bill Ingle, a senior analyst, at Beecham Research. Figure 1 shows these parts and, although not all

Read more

CAT-M1 vs NB-IoT – examining the real differences

Posted on: June 21, 2021

As industry players look to provide the next generation of IoT connectivity, two different standards have emerged under release 13 of 3GPP – CAT-M1 and NB-IoT.

Read more

IoT and home automation: What does the future hold?

Posted on: June 10, 2020

Once a dream, home automation using iot is slowly but steadily becoming a part of daily lives around the world. In fact, it is believed that the global market for smart home automation will reach $40 billion by 2020.

Read more

5 challenges still facing the Internet of Things

Posted on: June 3, 2020

The Internet of Things (IoT) has quickly become a huge part of how people live, communicate and do business. All around the world, web-enabled devices are turning our world into a more switched-on place to live.

Read more

What is IoT?

Posted on: July 7, 2019

What is IoT Data as a new oil IoT connectivity What is IoT video So what’s IoT? The phrase ‘Internet of Things’ (IoT) is officially everywhere. It constantly shows up in my Google news feed, the weekend tech supplements are waxing lyrical about it and the volume of marketing emails I receive advertising ‘smart, connected

Read more
IoT Newsletter

Join the IoT Now online community for FREE, to receive: Exclusive offers for entry to all the IoT events that matter, round the world

Free access to a huge selection of the latest IoT analyst reports and industry whitepapers

The latest IoT news, as it breaks, to your inbox