Dual-sensor package devices for safety-critical automotive applications introduced by Infineon

infineon-logo-v1

Typically, it needs two sensor chips today for reliable and precise sensing of the steering torque in an electric power steering system. Thanks to a dual-sensor package innovation of Infineon Technologies AG , it will be only one sensor chip in future. Infineon has introduced two device families of linear Hall sensors and angle sensors that already use the new dual-sensor package.

It supports ASIL D systems and reduces physical space requirements and system cost; for example in steering applications requiring high availability as used in autonomous driving. The dual-sensor package was developed at the Infineon site in Regensburg, Germany.

By using an innovative stack mounting technology, the devices of the linear Hall sensor and angle sensor families combine two independent sensors within standard and space-saving PG-TDSO packages only about 1mm thin. Instead of the common approach of side-by-side sensor placement, Infineon stacks the two sensors with a patented flip-chip technique. This saves precious space and cost in safety critical applications, such as electric power steering (EPS), throttle control, pedal position and brushless DC motor control in such areas as EPS motors, transmission and clutch actuators.

The dual-sensor package integrates two linear Hall sensors or two angle sensors. Both sensors have separate power supply and separate signal outputs. They are electrically independent due to galvanic isolation. This means that the two sensors work independently which increases reliability of the system. The SMD packages have 8 pins or 16 pins. Using these packages, Infineon also offers single sensor versions.

Sensor redundancy is of particular interest for new generations of EPS systems with increased ISO 26262 requirements and for other safety critical applications that rely on Hall effect torque sensors and GMR/AMR (Giant Magneto Resistance / Anisotropic Magneto Resistance) angle detection. The dual-sensor package supports ASIL D systems; Infineon provides ISO 26262 documents and safety expertise to assist its customers – automotive system suppliers – in the design of ISO compliant systems.

“Automotive safety requirements according to ISO 26262 demand sensor redundancy for safety critical applications like electric power steering,” says Ralf Bornefeld, vice president and general manager of the Sense and Control business at Infineon Technologies. “Underlining our leadership in the automotive sector with the broadest magnetic sensor portfolio in the market, Infineon addresses the need for sensor redundancy by intelligently integrating two sensors in one package. With two sensors in one small package, our customers can reduce their system costs and design very compact ASIL D systems.”

Footprint of dual-sensor package is identical to a single-sensor

With the flip-chip mounting technique of the dual-sensor package, both sensing elements are placed in the same lateral position and detect a single uniform magnetic field, which can be compared directly by the associated system microcontroller. The flip-chip mounting technique enables very small package dimensions and a PCB layout with reduced space. In comparison, conventional side-by-side sensor methods detect different magnetic fields. This means the magnetic field must be stronger than the one with the dual-sensor package leading to larger packages, the need for stronger more expensive magnets, and field variations due to the distance between the two sensing elements. Using larger, more expensive magnets also results in design effort needed for exact magnetic field trimming. With the new Infineon sensor families, engineers can make use of smaller, less expensive magnets and they can skip the effort on magnetic field trimming.

The dimensions of the new PG-TDSO-8 package for linear Hall sensors are identical to the footprint of single sensor devices, at just 4.0mm x 5.0mm x 1.2mm (height inclusive stand-off). Infineon also offers angle sensors (both with GMR and AMR technology) in a PG-TDSO-16 package. All sensors in dual-sensor packages are specified for a temperature range of -40 °C to 125 °C and automotive qualified.

Availability of dual-sensor package technology devices

Engineering samples of linear Hall sensors TLE4997A8D and TLE4998x8D in the PG-TDSO-8 package are already available. Volume production is planned to start end of year 2014.

Engineering samples of angle sensors TLE5012BD and TLE5309D in the PG-TDSO-16 package are also available. The TLE5012BD integrates two sensors using iGMR-based technology, while the TLE5309D integrates one sensor using iAMR-based technology and one sensor using iGMR-based technology. Volume production for angle sensor TLE5012BD is scheduled to start end of 2014 while volume production of TLE5309D is planned to start mid-2015. Infineon also offers the linear Hall sensors and angle sensors as single-sensor solutions.

Infineon is a strong partner for sensor applications

As a broadline supplier, Infineon draws upon 40 years of experience in sensor design and production and the broadest magnetic sensor portfolio in the market. The company sold more than two and a half billion integrated magnetic and pressure sensors over the past ten years. Infineon is number one in wheel speed sensors and number one in pressure sensors for side airbags as well as for tire pressure monitoring systems. On average, 20 magnetic and low pressure sensors are used per car, today. Four of these are provided by Infineon. In EPS Infineon also ranks number one with a market share of about one third.As strong partner, the company provides more than one million sensors per day to the automotive market.

Further information on the dual-sensor package solutions and its product portfolio are available at www.infineon.com/dual-sensor and at www.infineon.com/sensors

RECENT ARTICLES

Panasonic and Jasmy unveil Web3 Platform for IoT data control

Posted on: March 28, 2024

Panasonic has joined forces with Jasmy (JASMY) blockchain to introduce a Web3 platform that will facilitate the connection of personal data on the Internet of Things (IoT). The collaboration between the Japanese-based blockchain and Panasonic Advanced Technology was initiated in February, but the official announcement was made on March 26.

Read more

Driving connected personalised user experiences with Generative AI

Posted on: March 27, 2024

As the world continues to rapidly move towards digitalisation, customer expectations are also on the rise. Around the globe, telcos are grappling with meeting these expectations. As well as ensuring connectivity in a secure, seamless, and consistent manner 24/7, to compete and differentiate, operators now need to provide personalised experiences that are as unique as

Read more
FEATURED IoT STORIES

What is IoT? A Beginner’s Guide

Posted on: April 5, 2023

What is IoT? IoT, or the Internet of Things, refers to the connection of everyday objects, or “things,” to the internet, allowing them to collect, transmit, and share data. This interconnected network of devices transforms previously “dumb” objects, such as toasters or security cameras, into smart devices that can interact with each other and their

Read more

The IoT Adoption Boom – Everything You Need to Know

Posted on: September 28, 2022

In an age when we seem to go through technology boom after technology boom, it’s hard to imagine one sticking out. However, IoT adoption, or the Internet of Things adoption, is leading the charge to dominate the next decade’s discussion around business IT. Below, we’ll discuss the current boom, what’s driving it, where it’s going,

Read more

9 IoT applications that will change everything

Posted on: September 1, 2021

Whether you are a future-minded CEO, tech-driven CEO or IT leader, you’ve come across the term IoT before. It’s often used alongside superlatives regarding how it will revolutionize the way you work, play, and live. But is it just another buzzword, or is it the as-promised technological holy grail? The truth is that Internet of

Read more

Which IoT Platform 2021? IoT Now Enterprise Buyers’ Guide

Posted on: August 30, 2021

There are several different parts in a complete IoT solution, all of which must work together to get the result needed, write IoT Now Enterprise Buyers’ Guide – Which IoT Platform 2021? authors Robin Duke-Woolley, the CEO and Bill Ingle, a senior analyst, at Beecham Research. Figure 1 shows these parts and, although not all

Read more

CAT-M1 vs NB-IoT – examining the real differences

Posted on: June 21, 2021

As industry players look to provide the next generation of IoT connectivity, two different standards have emerged under release 13 of 3GPP – CAT-M1 and NB-IoT.

Read more

IoT and home automation: What does the future hold?

Posted on: June 10, 2020

Once a dream, home automation using iot is slowly but steadily becoming a part of daily lives around the world. In fact, it is believed that the global market for smart home automation will reach $40 billion by 2020.

Read more

5 challenges still facing the Internet of Things

Posted on: June 3, 2020

The Internet of Things (IoT) has quickly become a huge part of how people live, communicate and do business. All around the world, web-enabled devices are turning our world into a more switched-on place to live.

Read more